Surface Mount Sampler

Our surface mount samplers connect to a flange mounted to the side of a vessel or a large diameter pipe. We offer variations to suit all orientations from the side of the vessel to the base of the vessel. They allow a representative liquid sample to be taken from the vessel or pipe line and this is dispensed typically into a screwed in sample bottle.

Their design utilises a conical globe valve type seal arrangement with a PTFE seal ring. We can provide these samplers either in stainless steel or more exotic corrosive applications materials like Hastelloy.  The samplers can also incorporate a purge which is piped to a nitrogen supply and blows any remaining sample clear into the sample bottle ready for the next sample.

Many installation choices.

Available in a large number of installation options including ASME / DIN flanges, Tri Clamp, threaded BSP / NPT. Insertion length requirements  can be accommodated and because the sampler is cleared with a nitrogen purge no product is held up even on quite long immersion lengths. The longer insertion lengths help to reduce the effects of build up that can form on the sides of a vessel preventing a representative sample being taken close to the vessel wall.

We can offer the sampler with standard seals suitable for use to 232 PSI and 392° F, should you require a higher temperature design, we can also supply this.

The surface mount sampler is supplied with a spring return safety handle with padlockable facility.

We would recommend that the sample bottle is housed within a safety cabinet to protect the bottle and the operator.